How To Unclog A Drain With Standing Water

How To Unclog A Drain With Standing Water

A properly working rain is a blessing in your house. If there are drain problems, then you would require local drain cleaning services. Drain issue is a menace and the worst drainage issue that you could face is a clogged sink or tub with standing water.

There are many chemical cleaners in the market which help to unclog your drain, but they are also dangerous to use and you would need safety precautions while using it. However, there are many ways to clear your drain without the use of chemical cleaners. Standing water also encourages the growth of fungus and mildew and attracts many insects. You need to deal with the issue fast and for that you can either use a cleaning service or make use of common things in your home. Listed below are ways which could help you get rid of a clogged drain.

The Vinegar And Baking Soda Method

Before you start with this method, you need to check the drain for any scum, soap scum, small pieces of soap, globs of hair, or any other debris that is stuck. Wear rubber gloves before checking. Once you are done, you will need to clear out the water from the sink or tub. Use a mug or tub to gather the water and throw in a working drain or flush it down till all the water is almost gone.

You will need 1 cup of vinegar and one cup of baking soda for this purpose. Slowly pour in the baking soda in the drain and let it settle in it. Wait for around 5 minutes. Then gradually pour in the vinegar and leave it for at least 30 minutes, as soon as you pour the vinegar, a bubbling reaction will be seen. It is recommended to put a rag cloth on top of it so there is no disturbance with the chemical process. After 30 minutes pour hot boiling water in the drain, but if you have PVC pipes installed then use only normal hot water from the tap as boiling water can damage the PVC pipes. The chemical reaction of the baking soda and vinegar reacts with the clogs and loosens them, while the additional hot water helps to further clear any debris or leftover clogs. Leave it for an hour and then open the tap to see the water flowing freely.

Plunging Technique

Another method of unclogging a drain is the plunging technique. You will need your household plunger for this. It is recommended to apply a layer of petroleum jelly on the tip of the plunger so that all the scum and the debris gets stuck easily on it.

How To Unclog A Drain With A Plunger?

If your sink has an overflow drain then you need to clean it is as well. Take a small rag cloth and use it to clean the overflow drain and pull out any scum, hair, or debris. Many times, the overflow drain can also contribute to a clogged drain and standing water. Here you should also know that not all sinks or tubs have an overflow drain so if you do not have it then you should disregard this step.

Now stick the plunger on top of the drain and push in and out with force at a consistent speed. This creates an air pressure inside the plunger and loosens any clog or debris stuck inside the drain.

Once the clog is loosened up it can easily let the water flow through the drain. You must be patient with the plunging technique because it is slow but remarkably effective for a clogged drain with standing water. You will get to know that the clog has been removed once you hear the water flowing through the pipes.

After this you should open the hot water tap for at least 10 to 15 minutes so any clog that is left behind also loosens up and falls.

Get Professional Help

If even after these techniques your situation is the same and the drain is still clogged, then the issue is more complicated. So, you shouldn’t do it yourself and call in drain contractors that can carry out a camera inspection and then find the right solution for the clogged drain. You may have to spend some money on it, but those frequent drain problems will be solved.

Leave comment

Your email address will not be published. Required fields are marked with *.