How To Fix A Dishwasher Leaking Water
Dishwashers are helpful, and they make our boring work in the kitchen quick and fun. But since dishwashers use water in their operation, they are always prone to leaks. If you have a dishwasher that is leaking, you should start the repair by first finding the source of the leak or hire an appliance repair expert.
Usually the parts of a dishwasher like the gasket, spray arm, hoses, float, inlet valve and others cause an issue like water leaking out of the appliance. After you’re done finding the cause of a dishwasher leak, you can start the repair process.
Here is how you can find the source of a dishwasher leak, and repair it as soon as possible.
Find What’s Causing The Leak
The right way to start the inspection is removing the access panel from your dishwasher. There is also a kick plate on the bottom part of the dishwasher which can be removed to expose some of the connections as well.
You can easily remove the panel by using a screwdriver. It’s easy enough if you know where the screws are. Removing the panel is usually all you’re required to do in order to find the source of a dishwasher leak.
Take A Look At The Pump
After removing the front panel of the dishwasher, you should be able to see the pump. If you’re having some difficulty, you can use a flashlight to highlight the pump and everything that’s connected to it.
When the pump is clearly visible, you can check if any of the items like the pump itself, motor, housing, or the seal has any cracks on them. Keep in mind that if the water leakage issue is with the pump or one of its components, the water will always leak from the bottom of the dishwasher. So, that’s a tip to remember as this can make your repair process a lot easier.
Check The Areas That Commonly Leak
Dishwasher leaks can happen anywhere from the front or the bottom portion of the dishwasher. However, you can’t proceed further into the repair process if you don’t know the source of dishwasher leak. To find this out, you can run the dishwasher through a normal cycle and inspect closely to see where the water is leaking from.
If you see the water leaking from under or around the dishwasher’s door, this can indicate a problem with a float, gasket, or spray arm. However, if you notice the water coming out from the bottom, this indicates an issue with the pump, water inlet, or with any of the hoses.
In the same way, you should check the door gasket, water inlet valve, the water level, spray arm, and other things for any issues. Try tightening the hoses and clamps and see if the issue is fixed. If not, then move on to the next step.
Fix The Problematic Part
If the issue is with the door gasket, you can start by purchasing the right door gasket according to your dishwasher’s specific model. The process is as simple as removing the old “Damaged” gasket, cleaning the whole area, and installing the new gasket to apparently fix the issue. Test the dishwasher with the help of another cycle to see if the problem is fixed or not.
However, if the problem seems to be with the pump of your dishwasher, the repair process might be a bit difficult depending on your experience of dealing with faulty dishwasher pumps.
The process is all the same, you start with buying the right pump for your dishwasher’s specific model. You should then unplug the power cable of your kitchen appliance to keep away from any risk of electrocution. Take off the value that supplies as well before unscrewing the pump from its place and replacing it with the new pump. However, you might need to remove the dishwasher from the cabinet. You can call an expert to help you out in this process as things can be complicated.
Usually, there are just minor leaking issues, like with the spray arm, with the float, water inlet valve, or the hose. You can easily fix those issues on your own. You can find lots of helpful tutorials on the internet if you feel stuck at any point. However, if you need a hand, get a dishwasher repair Springfield service for fixing the appliance.